Penn P70 Single Unit Low Pressure Control, 12 in Hg to 80 psi Control, SPST Opens on Low Pressure Switch, Import
Penn Low Pressure Control, Single Unit, Series: P70, 12 in Hg to 80 psi Control Range, SPST Switch, Opens on Low Pressure, 25 psig Close, 15 psi Open Pressure, 5 to 35 psi Differential, 1/4 in Flare Nut, 36 in Capillary Length, Universal Mount, NEMA 1, Steel Case, 4 in W x 3-1/16 in H x 3 in L, Import
The P70, P72, and P170 Controls for low pressure applications are designed primarily for low pressure cut-out control, pump-down control, and capacity control on commercial refrigeration and air conditioning applications. These controls are available in several pressure ranges and are compatible with most common refrigerants. They may also be used on other non-corrosive fluid applications. Ammonia-compatible models are also available. Controls also are available in several different electrical ratings and switch configurations. The P72 models provide direct control of 208 to 240 volt single-phase motors up to 3 horsepower, and 208 to 220 volt three-phase motors up to 5 horsepower.
Penn P70 Single Unit Low Pressure Control, 12 in Hg to 80 psi Control, SPST Opens on Low Pressure Switch, Import
Penn Low Pressure Control, Single Unit, Series: P70, 12 in Hg to 80 psi Control Range, SPST Switch, Opens on Low Pressure, 25 psig Close, 15 psi Open Pressure, 5 to 35 psi Differential, 1/4 in Flare Nut, 36 in Capillary Length, Universal Mount, NEMA 1, Steel Case, 4 in W x 3-1/16 in H x 3 in L, Import
The P70, P72, and P170 Controls for low pressure applications are designed primarily for low pressure cut-out control, pump-down control, and capacity control on commercial refrigeration and air conditioning applications. These controls are available in several pressure ranges and are compatible with most common refrigerants. They may also be used on other non-corrosive fluid applications. Ammonia-compatible models are also available. Controls also are available in several different electrical ratings and switch configurations. The P72 models provide direct control of 208 to 240 volt single-phase motors up to 3 horsepower, and 208 to 220 volt three-phase motors up to 5 horsepower.